BlueNet Video BB01 User Manual download pdf (Page 11)

Installation

1. Attach video signal source to the IVS-100

To use Video Server, it is required to supply video signal to this device. Typical,

user may utilize standard camera, doom camera, bullet camera, PT camera, Speed

doom camera, or others as the video source. Connect the BNC terminal of camera

securely to IVS-100’s video input and make sure to power on the external camera

first.

IVS-100 Installation

2. Attach audio signal source to the IVS-100 (optional)

If user needs not only video stream but also audio stream, then the audio source

is attached to Video Server at the time. User may utilize line output of standard

camera or audio amplifier, or others as the audio source. Connect the RCA termi-

nal of audio device’s line output to IVS-100’s RCA input and make sure to power

on your camera or audio device first.

3. Connect Ethernet cable to the IVS-100

Connect an Ethernet cable to the LAN socket located on IVS-100’s front panel and

attach it to the network.

4. Supply power to the IVS-100

Connect the supplied power adapter to the IVS-100 and power up. Use only the

power adapter provided. Using a different one may cause hardware damage.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 54 55

No comments

BlueNet Video BB01 User Manual Page 11