BlueNet Video BB01 User Manual download pdf (Page 49)

Appendix A

Alarm I/O Connector

Appendix A Alarm I/O Connector

An external sensor that senses physical changes in the area Video Server is monitor-

ing can activate some features of IVS-100. These changes can include intrusion de-

tection or certain physical change in the monitored area. For examples, the external

sensor can be a door switch or an infrared motion detector. These devices are cus-

tomer provided, and are available from dealers who carry surveillance and security

products. Electrically, they must be able to provide a momentary contact closure.

This Video Server provides a general I/O terminal block with two digital inputs and two

outputs for device control. Pin 1 and 2 can be connected to an external sensor 1. Pin 2

and 3 can be connected to an external sensor 2. Both of the inputs, the voltage will be

monitored from the initial state ‘LOW’. The relay switch of pin 4, 5 and 6 can be used

to turn on or off the external device. The relay switch of pin 7 and pin 8 can be used to

turn on or off the external device. External Inputs/Outputs are working independently.

Pin Function

1 Alarm Input #1 (A). Max 24VDC, 12mA.

2 Alarm Input #1/2 (K).

3 Alarm Input #2 (A). Max 24VDC, 12mA

4 Alarm Output #1 (NC). Max 24VDC, 1A

5 Alarm Output #1 (COM)

6 Alarm Output #1 (NO)

7 Alarm Output #2 (COM). Max 24VDC, 1A

8 Alarm Output #2 (NO)

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55

No comments

BlueNet Video BB01 User Manual Page 49